4in1 Soil Tester - Sun light, PH level, Moisture, Temperature

$14.99 $29.99 Save 50%



Measuring pH is important for the well being of all plants and your lawn. Some plants grow better in slightly acidic soil, some better in more alkaline soil.

With this 4in1 Soil Tester, you can check in your garden, vegetable garden, lawn, and potted plants whether the soil is suitable for a particular plant. Use the device to measure growing conditions for all kinds of plants indoors and outdoors. You can also check the humidity in the soil, the temperature and intensity of sunlight using this ground meter.

This 4in1 Soil Tester can be especially useful in lawn care in determining the soil conditions in different areas of your garden and finding the correct lawn seed and fertilizer. Bad spots in the lawn can be caused by poor drainage (wet soil, test the moisture), too much or too little acidity (test the pH), or the wrong light level (test light and use appropriate seed mix (sun/shade).

  • 4-in-1 Soil Tester for plants and lawns
  • Measures sunlight (9 levels), soil moisture (5 levels), soil pH (12 levels) and temperature (°C & °F)
  • 200mm long probe
  • Auto power off
  • Check the light intensity of the current environment
  • Fast and precise measurement
  • Excellent accuracy
  • Backlight feature

4in1 Soil Tester - Sun light, PH level, Moisture, Temperature


Use this 4 in 1 tester by directly pushing the probe into the soil

With its oversized backlight LCD screen results are easy to read

The meter has a probe with a length of 200 mm and an oversized LCD screen with backlight function, so all the results are easy to read. The unit also has a low battery indication and auto power-off function. Start with installing a 9V block battery.

You can check the intensity of sunlight in one click

For sunlight measurement press the €œOn€� button to start the unit and point the light sensor towards the light source and the light intensity will show.

Push the probe right into the soil for pH measurements

For pH measurements, you need to water your plant first if the soil is too dry. Switch the €œpH/Temp.€� switch on the back of the unit to the €œpH€� position and push the €œOn€� button. Push the probe down vertically in the soil, avoid any obstructions (like roots), and the pH value of the tested soil will be displayed. Take several readings to confirm your findings.

You can test soil moisture the same way as pH measurement

For moisture measurement switch the €œpH/Temp.€� switch on the back of the unit to €œtemp.€� position and push the €œOn€� button. Push the probe down vertically in the soil, avoid any obstructions (like roots), and the moisture of the tested soil will show.

Temperature measurements of your soil can be very handy

For temperature measurements of the soil follow the same instructions as for measuring moisture. Press the €œC/F€� button to choose reading in Celsius or Fahrenheit.

A manual is included with the interpretation of all readings.

General users tips

  • The unit will be switched off automatically if it hasnt been used for 5 minutes.
  • It can only be used in soil, so please dont use it in water or other solutions.
  • Dont forget to take off the protection cap of the probe before you start testing.
  • Dont leave the probe in the soil longer than necessary to avoid damage.
  • Push the probe vertically in the soil and dont use too much force if you feel any obstructions to avoid damage.
  • Wipe the probe clean and dry with a soft cloth before taking another test and after finishing the tests.
  • Remove gently any oxidation of the probe before and after testing
  • Dont forget to put back the protective cap of the probe after testing to prevent oxidation.
  • Remove the battery when you dont use the tester for an extended period of time.
  • Avoid dust and too much water (the meter is water-resistant, but not waterproof).


  • Test Range
    • Sunlight (9 levels): LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+
    • Moisture (5 levels): DRY+, DRY, NOR, WET, WET+
    • PH value (12 levels): 3.5~9.0pH
    • Temperature: -9~50°C (16~122°F)

  • Resolution:
    • Temperature: 1°C/1°F
    • pH: 0.5pH

  • Low battery indicator
  • Size: 122mm x 63mm x 36mm
  • Battery: 1 x 9V battery (not included)


  • 1 x 4in1 Soil Tester
  • 1 x Manual
Return & Warranty
Shipping Policies